Search
Home
Emily Shwake / BuzzFeed / Nifty

Supplies

3 × 12 inch piece of wood
2-inch Forstner drill bit, $16.79
Table clamp, $10
2-inch round magnets, $6.98
Industrial glue, $7.76
Bottle opener wall attachment, $3.95

1. Secure the end of a 3 x 12 inch plank to the edge of a table.

Secure the end of a 3 x 12 inch plank to the edge of a table.

BuzzFeed / Nifty

2. Use the drill bit to make two depressions in the wood, about 1/2 an inch apart. They should be just deep enough to fit the magnet which is a little over an inch thick.

Use the drill bit to make two depressions in the wood, about 1/2 an inch apart. They should be just deep enough to fit the magnet which is a little over an inch thick.

BuzzFeed / Nifty

3. Remove the wood from the clamp. Coat the bottom of the magnets with industrial glue and fit it in the depression.

Remove the wood from the clamp. Coat the bottom of the magnets with industrial glue and fit it in the depression.

BuzzFeed / Nifty

4. Flip the plank of wood over and attach the bottle opener to the opposite end of the plank.

Flip the plank of wood over and attach the bottle opener to the opposite end of the plank.
BuzzFeed / Nifty
Read Full Article on NIFTY